Lixit Glass Water Bottle 32 oz, Large Tube

Lixit Glass Water Bottle The Lixit Glass Water Bottle has tube sizing, small-5/15", medium-3/8" and large-5/8" and is designed for large and small birds and other animals such as rabbits, ferrets, guinea pigs, chinchillas, and small dogs. The kit contains steel mounting bracket and holder and easily attaches to wire cages with mounting hardware that makes it easy for quick refilling and cleaning. Keeps water fresh and clean from debris. Made with a stainless steel tube and non-toxic, USDA approved rubber stopper. - CAUTIONS/WARNINGS:Always make sure a new bottle is working properly before leaving your pet alone check water and drinking tube daily. - DIRECTIONS:Simple easy Installation: The unique quick-release locking bottle holder is designed for universal application and can be installed on most any wire metal or wooden cage. Tools are required for assembly. Simply select a convenient location and position the holder so that the tube will be about head high to your bird or pet. Cut out or spread cage wires apart if needed for the tube opening. Install with screws and mounting washers. Be sure the cut-out notches on the locking bracket are facing downward as illustrated. The mounting washers can be mounted onto horizontal vertical or diagonal (as on a chain link fence) cage wire tighten screws securely.
Helpful Hints:
1. Press inward on both sides of the bail wire and lift to release the bottle. It will require you to use thumb on one side and index finger on the other at the same time. Your bird will not be able to do this and if wire clamp is assembled correctly it should not be able to lift he wire.
2. The locking bracket must be installed with the cut out notches facing downward. When lifting the bail wire it should stop horizontally on the notches. If it lifts straight up vertically you have assembled the locking bracket upside down and you need to flip it over. The wire should only lift vertically when you have pressed on both sides of wire near notches and lift up.
3. If the back strap becomes bowed when mounting screws are tightened simply bend the pedestal mount up or down to fit the bottle.
4. The stainless steel lock-tight nuts have a nylon insert this prevents your pet from removing the nut as opposed to wing-nuts. They require a screwdriver and 3/8” wrench or pliers to assemble. For safety you may want to cut off the mounting screws flush with the locknut using a hacksaw or nippers.
5. All parts dishwasher safe. Wash as needed. Rinse thoroughly.
6. Always make sure a anew bottle is working properly before leaving your pet alone check water and drinking tube daily.
7. When inserting tube and stopper into bottles make sure you have pushed the stopper tightly into bottle. It is sometimes helpful to get the stopper wet before inserting. Approximately ¼” of stopper should be exposed on 16 oz. bottles ½” on 32 oz. bottles. Make sure you fill bottle completely full.
- INGREDIENTS:Glass - MATERIAL/COMP:Solid (e.g. Chews Tablet Toy) - STORAGE/DISPOSAL REQ:Keep out of reach of children. - HEIGHT(INCHES): 4.500 - WIDTH(INCHES):12.000 - LENGTH(INCHES):4.500

Ingredients

Glass

Dosage & Directions

Simple easy Installation: The unique quick-release locking bottle holder is designed for universal application and can be installed on most any wire, metal or wooden cage. Tools are required for assembly. Simply select a convenient location and position the holder so that the tube will be about head high to your bird or pet. Cut out, or spread cage wires apart if needed for the tube opening. Install with screws and mounting washers. Be sure the cut-out notches on the locking bracket, are facing downward as illustrated. The mounting washers can be mounted onto horizontal, vertical or diagonal (as on a chain link fence), cage wire tighten screws securely. Helpful Hints: 1. Press inward on both sides of the bail wire and lift to release the bottle. It will require you to use thumb on one side and index finger on the other at the same time. Your bird will not be able to do this and if wire clamp is assembled correctly it should not be able to lift he wire. 2. The locking bracket must be installed with the cut out notches facing downward. When lifting the bail wire, it should stop horizontally on the notches. If it lifts straight up vertically you have assembled the locking bracket upside down and you need to flip it over. The wire should only lift vertically when you have pressed on both sides of wire near notches and lift up. 3. If the back strap becomes bowed when mounting screws are tightened, simply bend the pedestal mount up or down to fit the bottle. 4. The stainless steel lock-tight nuts have a nylon insert, this prevents your pet from removing the nut, as opposed to wing-nuts. They require a screwdriver and 3/8” wrench or pliers to assemble. For safety you may want to cut off the mounting screws flush with the locknut using a hacksaw or nippers. 5. All parts dishwasher safe. Wash as needed. Rinse thoroughly. 6. Always make sure a anew bottle is working properly before leaving your pet alone, check water and drinking tube daily. 7. When inserting tube and stopper into bottles, make sure you have pushed the stopper tightly into bottle. It is sometimes helpful to get the stopper wet before inserting. Approximately ¼” of stopper should be exposed on 16 oz. bottles, ½” on 32 oz. bottles. Make sure you fill bottle completely full.

Cautions & Warnings

Always make sure a new bottle is working properly before leaving your pet alone, check water and drinking tube daily.

Storage & Disposal

Keep out of reach of children.