Rx Solution Set with Duo Vent Spike IV vent Set 104"

Baxter Healthcare Solution Set with Duo Vent Spike, IV vent Set 103" 103", Injection site male luer lock adapter with retractable collarFor use with rigid non-vented and flexible containers Approximately 10 drops per ml - CAUTIONS/WARNINGS:Do not allow air to be trapped in set. Puncturing set components may cause air embolism. Single use only. Do not resterilize. Keep out of reach of children. - DIRECTIONS:Use aseptic technique.
Close regulating clamp (5). If using rigid non-vented container open vent cap (8) and insert spike (2) downward into container. (If using rigid non-vented container less than 150 mL fully squeeze and hold drip chamber (3) and do not release until after container is inverted and hung.) If using flexible container insert spike (2) with vent cap (8) closed. Fill drip chamber (3) to fill line. Open regulating clamp (5). Prime set purge air. Close regulating clamp (5) until roller meets bottom of frame. Attach male Luer adapter (7) to vascular access device using a firm push and twist motion and then engage the Luer lock collar to prevent accidental disconnection. Swab septum of injection site (6) with antiseptic prior to access. Access injection site (6) with siliconized 18 gauge (or smaller bore) needle.
To properly set flow always close regulating clamp (5) until roller meets bottom of frame then reopen to establish flow rate. Repeat procedure if adjusting clamp from fully open position.
- INGREDIENTS:See product for details. - MATERIAL/COMP:Solid (e.g. Chews Tablet Toy) - STORAGE/DISPOSAL REQ:Store in a cool dry place. - HEIGHT(INCHES): 8.000 - WIDTH(INCHES):1.250 - LENGTH(INCHES):4.000

Ingredients

See product for details.

Dosage & Directions

Use aseptic technique. Close regulating clamp (5). If using rigid non-vented container, open vent cap (8) and insert spike (2) downward into container. (If using rigid non-vented container less than 150 mL, fully squeeze and hold drip chamber (3) and do not release until after container is inverted and hung.) If using flexible container, insert spike (2) with vent cap (8) closed. Fill drip chamber (3) to fill line. Open regulating clamp (5). Prime set, purge air. Close regulating clamp (5) until roller meets bottom of frame. Attach male Luer adapter (7) to vascular access device using a firm push and twist motion and then engage the Luer lock collar to prevent accidental disconnection. Swab septum of injection site (6) with antiseptic prior to access. Access injection site (6) with siliconized 18 gauge (or smaller bore) needle. To properly set flow, always close regulating clamp (5) until roller meets bottom of frame, then reopen to establish flow rate. Repeat procedure if adjusting clamp from fully open position.

Cautions & Warnings

Do not allow air to be trapped in set. Puncturing set components may cause air embolism. Single use only. Do not resterilize. Keep out of reach of children.

Storage & Disposal

Store in a cool, dry place.